Latest activity

Live updates
  • David62
    The AutoGlym wipes are excellent. Lay then on and leave soak before wiping away.
  • GazHyde
    I've reduced the donation target as the licenses have come in cheaper than I'd predicted and have have now been ordered and paid for...
  • M
    Brilliant - thank you. I’ll eagerly test my car tomorrow
  • Pond
    Pond replied to the thread Codes help.
    You need a code reader to find out. Expensive guessing otherwise.
  • Pond
    Pond replied to the thread Codes help.
    Most likely a wheel speed (ABS) sensor. Hopefully it's not a yaw sensor (under the passenger carpet), as those are very expensive. Not...
  • hard top
    Pos. No. Driver Team Q1 Q2 Q3 1 12 Antonelli Mercedes 1:13.599 1:12.704 1:12.051 2 3 Verstappen Red Bull Racing 1:13.490 1:12.499...
  • Pond
    Pond replied to the thread Codes help.
    That's because whatever the faults are can't be cleared as they are there permanently, even though the scanner has cleared them. Usually...
  • Stevo7682
    Stevo7682 replied to the thread Codes help.
    I have a creator 110 and 310 and i have found sometimes it will clear the codes but not remove them and if i use our Bosch kts...
  • Devon Z
    Devon Z replied to the thread Codes help.
    So when I clear the codes the code reader says code’s successfully cleared but upon rescan they are still there. I have enough...
  • AleNod
    You're the second person to recommend those Andy, I must remember to pick up a pack. I did have a spray bottle of both windolene and...
  • Stevo7682
    Stevo7682 replied to the thread Codes help.
    As said by @Pond your faults may be historic. Best thing to do when chasing up stuff that may or may not be an issue is to wipe all the...
  • Argyll Andy
    Always carry a box of these. Was sceptical when they were recommend in Halfords but they work fantastically. Also carry a spray bottle...
    • Screenshot_20260606_130543_Samsung Browser.webp
  • TiggR_R1
    MickyG, Please disregard post 161 completely. My mistake I got the relay positions confused when turning over the relay to check...
    • IMG_1898.webp
  • Matt Barnes
    well the weather has put paid to doing anything today.... hoofing it down earlier and blowing a hoolie.....cover got pulled off by the...
    • 1780743683365.webp
    • 1780743848658.webp
    • 1780744176270.webp
    • 1780744493458.webp
  • Pond
    Pond replied to the thread Codes help.
    If you clear the codes and they come straight back it means the faults are still there, so the issue is 'live'.
Back
Top